Mosfet II with Wiring
Mosfet II with Wiring
- Numer artykułu:
- 11246700000
- Dostępność:
- Wyprzedane
Ten przedmiot nie jest w tej chwili dostępny.
27,90 €
Metody płatności
Bank transfer
Wysyłka i zwroty
- Bezpłatnie Wysyłka z koszyka 299,00 €
- Najszybsza wysyłka do Polska
- 2 lata gwarancji na produkt
- 14-dniowa gwarancja zwrotu pieniędzy
Opis
Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns.This system increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
- Pre-soldered wires allow for faster and easier installation into the V2-type gearbox. Wires are provided with the additional length for user adaptation.
- Four high-quality AWG16 1,5mm power wires and two AWG22 0.34qmm signal wires with protective coating insulation sleeve.
- Mainboard covered with conformal coating for water resistance.
- Designed for springs up to M210 (equivalent for current 150A single-shot fire or 50A burst fire for max. 30s).
- Ideal for popular batteries up to 17V (Ni-xx 8.4 - 12V, Li-Po 7.4 - 14.8V).
- No current consumption in the idle mode and no sparking on the switch contacts.
- Overall dimensions of 25x12x7mm.
Wymiary i waga
- Długość zapakowana:
- 17.5 cm
- Szerokość zapakowana:
- 10 cm
- Wysokość zapakowana:
- 1.3 cm
- Waga:
- 0.041 kg
- Waga w opakowaniu:
- 0.05 kg