Mosfet V2 with Wiring
Mosfet V2 with Wiring
- Numer artykułu:
- 11246600000
- Dostępność:
- Polska 2-3 W magazynie, dostawa w ciągu kilku dni roboczych
33,90 €
Metody płatności
Bank transfer
Wysyłka i zwroty
- Bezpłatnie Wysyłka z koszyka 299,00 €
- Najszybsza wysyłka do Polska
- 2 lata gwarancji na produkt
- 14-dniowa gwarancja zwrotu pieniędzy
Opis
Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns with V2 gearbox.This system increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
- Pre-soldered wires allow for faster and easier installation into the V2-type gearbox. Wires are provided with the additional length for user adaptation.
- Two high-quality AWG16 1,5mm wires with a length of 300 and 700 mm. Blue AWG24 0.34qmm wire with protective coating insulation sleeve and a length of 1000 mm.
- Cables are designed to lead into the stock, but wires can be adapted to the front if the situation warrants.
- Mainboard covered with conformal coating for water resistance.
- Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
- Ideal for popular batteries up to 17V (Ni-xx 8.4 - 12V, Li-Po 7.4 - 14.8V).
- No current consumption in the idle mode and no sparking on the switch contacts.
Wymiary i waga
- Długość zapakowana:
- 17 cm
- Szerokość zapakowana:
- 10 cm
- Wysokość zapakowana:
- 2 cm
- Waga:
- 0.004 kg
- Waga w opakowaniu:
- 0.05 kg