Mosfet V3 Above the Gearbox
Mosfet V3 Above the Gearbox
- Numer artykułu:
- 11247000000
- Dostępność:
- Polska 2-3 W magazynie, dostawa w ciągu kilku dni roboczych
33,90 €
Metody płatności
Bank transfer
Wysyłka i zwroty
- Bezpłatnie Wysyłka z koszyka 299,00 €
- Najszybsza wysyłka do Polska
- 2 lata gwarancji na produkt
- 14-dniowa gwarancja zwrotu pieniędzy
Opis
Precisely and professionally made drop-in MOSFET system designed for Airsoft Electric Guns with V3 gearbox installed in the AK-type replicas.This system increases the AEG's rate of fire and limits unnecessary battery usage.
In automatic-fire mode, the piston stops in a random position due to the gearbox design.
For proper operation, it is necessary to have a functional gearbox cut-off lever, selector plate, reverse latch, trigger, and trigger block, as it has the standard gearbox.
Device features:
- Pre-soldered wires allow for faster and easier installation into the replica. Wires are designed for use in the AK-type AEG or with the battery above the gearbox.
- High-quality AWG16 1,5mm and signal blue wire AWG22 0.34qmm with protective coating insulation sleeve.
- Mainboard covered with conformal coating for water resistance.
- Designed for springs up to M160 (equivalent for current 75A single-shot fire or 25A burst fire for max. 30s).
- Ideal for popular batteries up to 17V (Ni-xx 8.4 - 12V, Li-Po 7.4 - 14.8V).
- No current consumption in the idle mode and no sparking on the switch contacts.
Wymiary i waga
- Długość zapakowana:
- 17 cm
- Szerokość zapakowana:
- 10.2 cm
- Wysokość zapakowana:
- 2 cm
- Waga:
- 0.002 kg
- Waga w opakowaniu:
- 0.03 kg